Gatecrasher Modular™ is a water-tamped charge to breach thick concrete or brick walls. It has been designed as a charge that offers much of the same performance as the Gatecrasher™ but in a smaller form, making it ideal for situations where carrying a fully loaded Gatecrasher or frame charge is impossible. This version of Gatecrasher uses straight modules that operators can arrange in arrays to create charges of different sizes and loads. This versatility enables customisation, tailoring the charge to the operation's needs. Operators can secure each module in the Tactical Sleeve, roll it up, and quickly position it, even in tight environments like helicopters. Two versions are available: Type 1, which has an explosive charge in contact with the target, and Type 2, which has a linear cutting charge for maximum penetration.Â
Variable NEQ, powerful effect
Two versions available
Modular, portable, and compact
Simple to set up and deploy
Videos
Explosive Load and Performance
Gatecrasher Modular™ Type 1
The Type 1 version typically breaches walls and other solid structures. It has three 15mm deep pockets that can accommodate sheet explosive, but operators can also use plastic explosive or detonating cord. Depending on the requirement, the NEQ of each module can be varied from 20g to 180g.
Gatecrasher Modular™ Type 2
The Type 2 version features a specially designed linear cutting charge with an NEQ of 300g. This version cuts the target with deeper penetration. Operators can choose to remove the shaped charge liner and fill the cavity with explosives.
Deployment to Target
Individual modules can be loaded and used in any configuration required, with or without the Tactical Sleeve. The standard configuration for a charge is four modules (provided in a set). The charges come with packs of Detcord Clips™ for connecting detonating cord, electric detonators, or shock tube detonators.
The Tactical Sleeve is made of nylon, covered in Velcro, and has pockets to insert the charges. Individual pockets can be repositioned on the sleeve as required. Pockets at either end of the outside of the sleeve allow it to be positioned on the target using a prop stick.
Specifications
| Charge width | 0.6m |
| Height (four modules) | 1.2m |
| Weight (per module) | 3.75kg |
| Type 1 min NEQ (per module) | 20g |
| Type 1 max NEQ | 180g |
| Type 2 NEQ | 300g |
